Корпорация "PROFI"
"You have to live with a dream, but not to live in a dream"
Preparation of welders for certification exams according to DSTU (National Standard of Ukraine) ISO 9606


Start training and in two months you can get to work.
Welder is one of the few working specialties that requires the constant assessment of qualifications.
For welders in order to prepare for certification exams for assessing qualifications in accordance with the European standard ISO 9606, which is conducted by the inspector of the German Certification Company TÜV (Association for Technical Supervision).
Training stages
Practical part
1
Stage I. Training on Soldamatic simulators using the augmented reality (AR) technology
It is not necessary to burn hundreds of meters of welding wire and spoil tens of kilograms of rolled metal in order to get the welder's hand in and teach to understand the welding process.

The initial training on the Soldamatic welder's virtual simulators speeds up the development of welding technology by fifty percent, and the additional theoretical course allows you to carry out the welding process consciously.
2
Stage II. The welding modes mastering
The instrument "Analyzer of instability of welding processes" connected to the welding machine and recording the state of the welding arc in real time helps to understand the influence of the parameters of the welding process on the formation and quality of the weld cadet.

The result of the obtained data processing is displayed in the form of a histogram for each parameter of the welding process, which demonstrates the frequency of repeatability of a particular value during the welding arc burning.
3
Stage III. The preparation for certification according to ISO 9606
At the third stage, the welder practices the execution of the welding process on the metal samples in the different spatial positions in accordance with EN ISO 6947.

Based on the results of the training process, the trainees undergo the qualification tests that allow them to complete their studies with the certification according to the international standard ISO 9606. The certification is carried out by an expert from the German certification organization TÜV.
4
Theoretical part
The methodological manuals on mechanized welding in active gases (MAG 135) of steel products in accordance with DSTU ISO 9606-1 and welding with a tungsten electrode in an inert gas medium were drawn up and published for theoretical preparation of trainees for the certification exams,
(TIG 141) stainless steel and non-ferrous metal products DSTU ISO 9606-1; 2; 3; 4; 5
Innovations and processes in our training center
We select only those who wants to work, and then to earn on thier skills
Personal approach
Main selection criterion is the desire to acquire a profession. The program is built according to your skills.
Training at Soldamatic is free
Training on Soldamatic simulators using augmented reality (AR) technology
Pay only for materials
In our training center you pay only for the materials used in the second stage of training.
Employment after receiving a certificate
If you were selected for training and you have successfully prepared for it, then you will be employed to our company after the certification.
Usage of Soldamatic simulators in welder training
One of the most important aspects in the preparation of welders is the correct setting of the hand. It is important not only to learn the movement, but also to successfully consolidate it. At the same time, the cost of one welding joint is 120 UAH (2 plates 250 * 125 * 10 mm in size, welding wire). And this is excluding the cost of protective gas, electricity, depreciation of equipment.

In the training center "Ukrprofigroup" the primary training of welders is carried out on the Spanish Soldamatic simulators. The similar simulators are already used in training centers of large European companies (Volskwagen, Siemens, John Deer, etc.). The time for training welders is reduced by 56%, the financial costs for consumables - by 68%. The only company that trains welders at Soldamatic in Ukraine is "Ukrprofigroup" ("Profi" Corporation)
Использование тренажеров Soldamatic в подготовке сварщиков (Киев, Корпорация "Профи")
The training of welders in the "Profi" Corporation. Episode 1
The first part of a five-part training film, which shows the process of welders training at the "Profi" Corporation.

The details on the welders training by phones + 380672540001, + 380676386402

- Profession "Electric Welder"
- What documents should a welder have in modern production?
- Preparation for obtaining the "Welder Qualification Certificate"
- "Metal needs to be felt, and the arc - to understand"
Training of welders in the "Profi" Corporation. Episode 2.
The second part of the five-part training film, which shows the process of welders training at the "Profi" Corporation.

The details on the welders training by phones +380672540001, +380676386402
Training of welders in the "Profi" Corporation. Episode 3
The third part of the five-part training film, which shows the process of welders training at the "Profi" Corporation.

The details on the welders training by phones +380672540001, +380676386402
Training of welders in the "Profi" Corporation. Episode 4.
The fourth part of the five-part training film, which shows the process of welders training at the "Profi" Corporation.

The details on the welders training by phones +380672540001, +380676386402
Training of welders in the "Profi" Corporation. Episode 5
The last part of the five-part training film, which shows the process of welders training at the "Profi" Corporation.

The details on the welders training by phones +380672540001, +380676386402
WELDING STANDARDS
Contacts
Office Address:
01014, Kiev, str. Bolsunovskaya, 8

Training Center Address:
Kiev, Kharkiv highway 15

Contact phone:
+38 (067) 565 3002

Email: kraskopartners@gmail.com

© 2019 "PROFI"Corporation
Leave your phone number and we will dial you
Or you can call us yourself
+38 (067) 565 3002